Looking forward to working with us
Cr12 hot rolled steel round bars
keywords:
Product Categories
Steel Round Bars
Email：
WhatsApp：
Applications of Cr12 steel material
Cr12 steel is a typical alloy Tool steel, Cr12 is a chinese Cold Work Alloy Tool Steel. Its Cold work Mechanical Properties is very nice. Cr12 steel with high abrasion resistance, micro deformation of cold work die steel, the wind hard tool steel, carbon content as high as 1.5%, chromium content as high as 11.5%, the heat treatment hardness can reach 60 HRC. Cr12 section steel can be used to：
a) silicon die is mainly used for small dynamic loaGBg conditions require high wear resistance, simple shape drawing and blanking dies.
b The system for manufacture benGBg molds requiring high wear, the complex shape of the punch, die, inserts, do punch, when the die is recommended, hardness 60 ~ 64HCR.
c) for the manufacture of drawing die die wear required, it is recommended hardness 62 ~ 64HCR.
d) for anti-cold aluminum extrusion die punch, it is recommended hardness 60 ~ 62HCR.
e) for benGBg carbon content of 0.65% to 0.80% proof builGBg steel, hardness 60 ~ 62HCR.
f) can be used for blanking die, punch, rolling wheels, shear blades, cold heaGBg die, clay mold.
g) can be used for thermoset plastic molGBg molds.
Chemical and Mechanical
Chemical composition(wt.%) of Cr12 grade: GB/T 1229-2000
| Elements | Min.（≥） | Max.（≤） |
|---|---|---|
| C | 2.00 | 2.30 |
| Si | - | 0.40 |
| Mn | - | 0.40 |
| Cr | 11.50 | 13.00 |
Mechanical properties of grade Cr12 GB/T 1229-2000
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 539 (≥) | 215 (≥) | 42 | 14 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 244 |
GB Cr12 alloy tool steel material equivalent -UNS T30403
| Grade | C | Si | Mn | P | S | Cr | Mo | V |
| D3 | 2.00～2.35 | 0.10～0.60 | 0.20～0.60 | 0.030 MAX | 0.030 MAX | 11.0～13.5 | ~ | 1.00 MAX |
| SKD1 | 1.90～2.20 | 0.10～0.60 | 0.20～0.60 | 0.030 MAX | 0.030 MAX | 11.0～13.0 | ~ | 0.30 MAX |
| Cr12 | 2.00～2.30 | 0.40 MAX | 0.40 MAX | 0.030 MAX | 0.030 MAX | 11.50～13.00 | ~ | ~ |
| 1.2080/ X210Cr12 | 1.90～2.20 | 0.10～0.40 | 0.15～0.45 | 0.030 MAX | 0.030 MAX | 11.00～12.00 | ~ | ~ |
Applications of Cr12 steel material
Cr12 steel is a typical alloy Tool steel, Cr12 is a chinese Cold Work Alloy Tool Steel. Its Cold work Mechanical Properties is very nice. Cr12 steel with high abrasion resistance, micro deformation of cold work die steel, the wind hard tool steel, carbon content as high as 1.5%, chromium content as high as 11.5%, the heat treatment hardness can reach 60 HRC. Cr12 section steel can be used to：
a) silicon die is mainly used for small dynamic loaGBg conditions require high wear resistance, simple shape drawing and blanking dies.
b The system for manufacture benGBg molds requiring high wear, the complex shape of the punch, die, inserts, do punch, when the die is recommended, hardness 60 ~ 64HCR.
c) for the manufacture of drawing die die wear required, it is recommended hardness 62 ~ 64HCR.
d) for anti-cold aluminum extrusion die punch, it is recommended hardness 60 ~ 62HCR.
e) for benGBg carbon content of 0.65% to 0.80% proof builGBg steel, hardness 60 ~ 62HCR.
f) can be used for blanking die, punch, rolling wheels, shear blades, cold heaGBg die, clay mold.
g) can be used for thermoset plastic molGBg molds.
Forging of Cr12 steel material
Preheat slowly to 900~950°C then increase the temperature more rapidly to 1050-1100 °C. Do not forge below 1020°C. Then cool the Cr12 slowly after forging.
Annealing of Cr12 steel material
GB Cr12 tool steel is delivered condition normal at annealing and machineable. If need re-annealing. Heat to the Cr12 steel 900 °C and Soak thoroughly, then cool in furnace. After annealing, the Cr12 delivery hardness is 255HB Max.
Stress Relieving of Cr12 steel material
When must tools made from Cr12 alloy tool steel are heavily machined or ground , the relief of internal strains is advisable before hardening to minimise the possibility of distortion. Stress relieving is very necessary, stress relieving should be done after rough machining. To stress relieve, heat the component carefully to 600-650°C, allow a good soaking period (two hours per 25mm of ruling section). Cool in the furnace or in air. The tools be finish machined before hardening.
Hardening of Cr12 steel material
GB Cr12 Delivery condition usually is Annealing, so hardening is necessary. Heat the Cr12 tools in a controlled atmosphere furnace, if have not the controlled furnace, pack hardening is recommended strongly. Pre-heat Cr12 tool steel to 750~800°C, soak enough time until heat through. Then brought up to 1000-1040 °C, cooling in air or oil quenching.
Tempering of Cr12 steel material
Heat the GB Cr12, Heat uniformly to the required temperature allowing a soaking time of two hours per 25mm of ruling section. Withdraw from the furnace and allow to cool in air. Different tempering temperature will get different hardness. Typical tempering is 204°C, after tempering hardness 61HRc Min.
Welding of Cr12 steel material
In general, we do not advise the welGBg of alloy tool steel but users sometimes prefer to weld in order to avoid the cost of retooling. It should be remembered that this grade is an air hardening steel and that in welGBg the area of the weld attains a temperature of about 1000°C. Cracking is likely to occur during cooling unless proper precautions are taken. Popular methods of welGBg are atomic hydrogen and argon arc. We recommend you contact your welGBg consumables supplier who should provide you full assistance and information on welGBg alloy tool steels.
Nitriding of Cr12 steel material
Cr12 alloy tool steel can be nitrided to give a hard surface case. After the nitriGBg heat treatment, the Cr12 is then very resistant to wear and erosion. NitriGBg also increases resistance to corrosion.
Final Grinding of Cr12 steel material
GrinGBg the GB Cr12 Steel. Select the correct grade of wheel in consultation with the grinGBg wheel manufacturer. Ensure the grinGBg wheel is in good condition by means of a suitable dressing tool. Wet grinGBg is a preferable option using a copious supply of coolant. If dry grinGBg is resorted to then use a very soft wheel.
Warehouse Storage
TIANYI Steel (Shandong) Co., Ltd. is located in the beautiful Shandong Province. With the continuous development of business, the company's business scope continues to expand. The company has a group of professional sales staff to provide customers with high-quality services. The company is committed to providing customers with high-quality, low-cost steel products. We have won the trust and praise of our customers with our commitment and quality-oriented service concept.
Packing and shipping
Our main products include: carbon steel plate, carbon steel pipe, color-coated sheet/coil, galvanized sheet/sheet tube/coil/corrugated sheet/plate steel (I-beam channel steel H-beam), long product, galvanized pipe, Welded pipe, gas pipe, spiral pipe, plate, thread, wire, automobile flat steel, etc. The stock of each specification is sufficient. And it is an excellent distributor of Chinese state-owned enterprises: Baosteel, Baotou Steel, Anshan Iron and Steel, Baotou Iron and Steel, and other national iron and steel enterprises.
Application field
Our advantage is to integrate market information, quickly find the products you need, provide high-quality price concessions, one-stop service, and provide you with products accurately and quickly. We always adhere to the tenet of "quality first, customer first, high-quality service, honesty and trustworthiness". With high-quality products, good reputation and high-quality service. We are committed to win-win cooperation with domestic and foreign merchants. We look forward to common development and create brilliance together. Feel free to contact our team to experience supreme service and quality products. Looking forward to working with us.
Customer praise
Customer visit
FAQ
Q1:Can you send samples?
A:Of course, we can provide customers with free samples and express shipping service to all over of the world.
Q2:What product information do I need to provide?
A:Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to purchase.
Q3:It's my first time to import steel products, can you help me with it?
A:Sure,we have agent to arrange the shipment, we will do it together with you.
Q4:What about product prices information?
A:Prices various according to periodic price changes of raw materials.
Q5:What ports of shipment are there?
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.
Q6:What is your terms of payment ?
A:Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment or based on BL copy or LC at sight.
Q7.Do you provide custom made Products service?
A: Yes,if you have your own design , we can produce according to your specification and drawing.
Q8:What are the certifications for your products?
A:We have ISO 9001, MTC, third parties’ inspections are all available such SGS, BV ect.
Q9:How long does your delivery time take?
A:In general, our delivery time is within 7-15 days, and may be longer if the quantity is extremely large or special circumstances occur.
Q10: How many countries you already exported to?
A:We have exported to America, Canada, Brazil, Chile, Colombia, Russia, Ukraine, Thailand, Myanmar, Vietnam, India, Kenya, Ghana,somalia and other African countries.Our export experience is rich, we familiar with different market demands, can help customers avoid a lot of trouble.
RELATED PRODUCTS
MESSAGE
Tel
Sala A8-1-1007, Centro de negocios Hanyu Jingu, No. 7000, Jingshi Road, Zona de alta tecnología, Ciudad de Jinan, Provincia de Shandong
All rights reserved© TIANYI Steel (Shandong) Co., Ltd. Website Building 300.cn Jinan2 SEO Business License
