Looking forward to working with us
Product
347 stainless steel is a columbium/tantalum stabilized austenitic chromium-nickel stainless steel.
This material is stabilized against chromium carbide formation by the addition of columbium and tantalum.
Since these elements have a stronger affinity for carbon than chromium,
columbium-tantalum carbides precipitate within the grains instead of forming at the grain boundaries.
More
This material is stabilized against chromium carbide formation by the addition of columbium and tantalum.
Since these elements have a stronger affinity for carbon than chromium,
columbium-tantalum carbides precipitate within the grains instead of forming at the grain boundaries.
Invar (also know as Invar 36, NILO 36, Pernifer 36 and Invar Steel) is a low expansion alloy consisting of 36% Nickel, balance Iron.
More
Galvanized sheet refers to the
steel plate coated with a layer of zinc.
Galvanizing is an economical
and effective antirust method which is often used.
About half of the world's zinc
production is used in this process.
More
steel plate coated with a layer of zinc.
Galvanizing is an economical
and effective antirust method which is often used.
About half of the world's zinc
production is used in this process.
H-beams are shaped like an H. H-beam is a structural beam made of rolled steel. It is incredibly strong. It gets its name because it looks like a capital H over its cross section.
More
1070 aluminum has high plasticity, corrosion resistance, electrical conductivity and good thermal conductivity, but low strength, not through heat treatment to strengthen, cutting is not good, can accept contact welding, gas welding.
Make use of its advantages to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts.
More
Make use of its advantages to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts.
Hot Rolled steel with an H-shaped cross-section.
Equal thickness in the two parallel flanges with no taper on the inside surface.
Classified into narrow, medium, and wide, based on the height and flange width.
More
Equal thickness in the two parallel flanges with no taper on the inside surface.
Classified into narrow, medium, and wide, based on the height and flange width.
Tel
Sala A8-1-1007, Centro de negocios Hanyu Jingu, No. 7000, Jingshi Road, Zona de alta tecnología, Ciudad de Jinan, Provincia de Shandong
All rights reserved© TIANYI Steel (Shandong) Co., Ltd. Website Building 300.cn Jinan2 SEO Business License
