Looking forward to working with us
Product
Din 17100 St37-2 is the most common steel grade in common carbon structural steel. export about 50 thousands tons St37-2 each month to middle east for making oil tanks there.When delivery these steel plate St37-2,our mill would issued original mill test certificates for each plate which including the heat number,batch number,dimension,quantity,chemical composition,mechanical property and heat treatment if required when ordered and other technical.
More
WearTuf 450 Abrasion Resistant Steel Plate
WearTuf 450 is a fully martensitic
Q&T abrasion resistant steel having a hardness of average 450 Brinell.
Due to the high impact toughness,
WearTuf 450 offers very good crack integrity.
More
Q&T abrasion resistant steel having a hardness of average 450 Brinell.
Due to the high impact toughness,
WearTuf 450 offers very good crack integrity.
In steel standard JIS G3106,steel grade SM570 owned the highest yield strength above 460 Mpa,and the tensile strength within 570-720 Mpa.Low temperature impacting test shall be done under minus 5 centigrade. roll hot rolled steel plate SM570 with thickness from 6mm-300mm,width from 1500mm-4000mm,length from 5000-16000mm.After finished rolling,the original mill test certificate would be issued by mill under format EN 10204 3.1,if our customers need the third party inspections,the MTC shall be issued under EN 10204 3.2 TYPE.
More
Steel grade Q390B is under steel specification GB/T1591 which is for high strength low alloy structural steels.When customers need special sizes for steel Q390B useage,Xinsteel has the ability to cut and weld in our processing plant for small parts,round plate,seal head and other frames
More
Jis g3106 SM520C weld used structural steel plate is with high strength including yield strength and tensile strength when rolling. mainly supplying hot rolled steel plate SM520C,hot rolled steel sheet SM520C,Normalized steel plate SM520C,Tempered steel plate SM520C and Quenched and tempered steel plate SM520C according to the end users’ request.Low temperature impacting test for steel plate SM520C should be adopted under 0 centigrade with the minimum impact energy at 47J.
More
WearTuf 500 Abrasion Resistant Steel Plate
WearTuf 500 Abrasion Resistant Steel Plate combines wear resistant
properties with excellent weldability and bending performance.
Due to the high impact toughness,
WearTuf 500 offers very good crack integrity.
More
properties with excellent weldability and bending performance.
Due to the high impact toughness,
WearTuf 500 offers very good crack integrity.
Tel
Sala A8-1-1007, Centro de negocios Hanyu Jingu, No. 7000, Jingshi Road, Zona de alta tecnología, Ciudad de Jinan, Provincia de Shandong
All rights reserved© TIANYI Steel (Shandong) Co., Ltd. Website Building 300.cn Jinan2 SEO Business License
